Tuesday, October 23, 2012

Two days ago my colleague Reto and I are other thoughts made for energy saving lamp and protect gml

Environmental protection with energy saving lamps and so ... | blog.flachmueller.ch
2004, co-sponsored by Osram and Philips BAG / BFE test report had claimed bulbs are not problematic with respect to electromagnetic fields than incandescent bulbs. This report is based on a method of measuring the high-frequency electric field (27 "52 kHz, harmonics up to 500 kHz), which delivers 100-times (!) Lower values than the correct, prescribed by the TCO measurement method. Properly measure all bulbs had crossed the TCO standard value of 1 V / m, namely by about 5 - to 20-fold. The Federal Office of Public Health gmls (BAG) has now been applied to a new study. The resulting values are at a distance of 30 centimeters at all tested energy-saving bulbs far below the internationally recommended limits. For the purposes of personal pension recommend the federal agencies to adhere to energy-saving lamps a minimum distance of 30 centimeters, particularly if the lamp "for example, a desk lamp - for a long time is in operation. Even in teaching we learned: who measures, measures crap. So if the limits are too high, you are far away from the object away until the value is correct. In this case, 30 cm. The consumer has to look so himself that he is not contaminated by its energy-saving lamp.
Two days ago my colleague Reto and I are other thoughts made for energy saving lamp and protect gmls the environment at all. There is a light bulb only of glass, wire, filament,

bracket and sheet metal screw, so when saving lamp is a lot added to polluting and energy-intensive high-tech: ballast, board, discharge tube, condenser, generator, ignition, electrode,

thermal fuse, connectors, adhesive, chemical gmls phosphors and coatings, solder, plastic housing ... and mercury. We wondered whether there really saves energy when production and disposal are also involved in the energy balance. On the Internet it is not hard to find too much except in the report Facts vs. Myths from the observer. It says: F or manufacture, use and disposal gmls of a Elf-watt energy-saving lamp is the energy consumption gmls about 7.5 kilowatt hours. Compared to an incandescent bulb, it has the energy production after 140 hours "over a lifetime from 6000 to 10 000 hours " already saved. In addition, the energy-saving lamp compared to incandescent lamps is much more environmentally friendly. This applies only to the good quality lamps that comply with the specification of the service life. But there are also saving lamps, which light emanates ZDAS œ too early. Another problem is the disposal. Incandescent and halogen bulbs can be disposed of with household waste. Energy-saving lamps on the other hand do not belong gmls in Güselsack. A saving bulb contains about five milligrams of mercury and pollutant-containing fluorescent powder. Retailers, manufacturers and importers are obliged to take back power-saving light bulbs and properly disposed of. Glass and metal parts can be recycled. Mercury and pollutant-containing phosphor powders are packed in barrels and land in Untertagdeponien. Probably. In a landfill as that in Kölliken where from the toxic waste threatens groundwater pollution and the landfill gmls will now be redeveloped gmls for 300 to 350 million francs in full within eight years has, of course, no energy is required and no CO2 expelled The example of energy saving lamp shows that our environmental plans are too short or too complicated, driven by a lobby. This also applies to other topics. Eg you can not build from one day to the other day economic electric cars, although this matrimonial had decades ago. Also, the switch to the OB V is not as easy to drive the trains are crowded, the investment in the expansion will pay anyone, gmls the ticket system is too complicated (this is another story) and the railway needs amounts of electricity, produces fine and has widespread nor Plumsklos what is elsewhere forbidden for environmental reasons a long time .. I still believe that are easiest gmls for fixed facilities (such as houses, roads, etc.) could save the car is agile and comes in my savings sequence at the end. The techniques such as isolation, heat pumps, solar panels for hot water, district heating networks are proven means to reduce the energy consumption and are easy to use. With the use of street lamps Energisparlampen way, is easy because of the distance of 30 cm must be maintained easily. However, an electric car with a battery of different highly toxic materials, or even a hybrid electric vehicle, which has two motors, a gasoline gmls tank, and a battery together, several gears, couplings, Antreibswellen (also not easy) h

No comments:

Post a Comment